Skilled Trades · Mississauga

Get TSSA certified. Start earning as a
gas technician.

Touch Abroad enrols domestic students, international students and protected refugees into hands-on, TSSA-approved trades certificates — and handles the admission from your first call to your first class.

Gas Technician G-3

— entry level

Gas Technician G-2

— work independently

Hydronic Heating Certificate

— specialise

EPIC

In collaboration with EPIC College of Technology

TSSA-approved provider · Mississauga campus
Free · No obligation

Find out which certificate you qualify for

Takes about 40 seconds · Enrolling for the next intake

TSSA-approved G-3 & G-2 training

In-person campus in Mississauga

Domestic, international & refugee applicants

Admission handled end to end

Trust Strip

TSSA-approved G-3 & G-2 training

In-person campus in Mississauga

Domestic, international & refugee applicants

Admission handled end to end

Skilled Trades · Mississauga

Where do you start?

Ontario’s gas certifications stack in a fixed order. Find yourself on the ladder below – then book a free check and we’ll confirm it against your documents.

G3

Step one

Gas Technician G-3

The entry point. No prior gas experience or certification required.

Work up to 400,000 BTU/h - supervised

G2

Step two

Gas Technician G-2

The working technician’s licence. Requires a valid G-3 certificate first.

Work up to 400,000 BTU/h - independently

+

Specialisation

Gas Technician G-3

A heating specialisation you can add at any point on the ladder.

Boilers, radiant floors & controls

The Certification Path

The Certification Path

Where do you start?

Ontario's gas certifications stack in a fixed order. Find yourself on the ladder below — then book a free check and we'll confirm it against your documents.

G3

Step One

Gas Technician G-3

The entry point. No prior gas experience or certification required.

G2

Step Two

Gas Technician G-2

The working technician's licence. Requires a valid G-3 certificate first.

+

Specialisation

Hydronic Heating

A heating specialisation you can add at any point on the ladder.

G-3

G-2

Hydronic Heating

Best for

Complete beginners entering the trade

Certified G-3 holders ready to work solo

Techs specialising in water-based heating

Prerequisite

None - start here

Valid G-3 certificate

None, but pairs well with G-2

Supervision

Must work under a G-2 or G-1

Works independently

Depends on your gas licence

Typical roles

Apprentice · Installer's assistant

Service technician · Furnace & boiler tech

Hydronic installer · Boiler service tech

Program Comparison
G-3 G-2 Hydronic Heating
Best for Complete beginners entering the trade Certified G-3 holders ready to work solo Techs specialising in water-based heating
Prerequisite None — start here Valid G-3 certificate None, but pairs well with G-2
Supervision Must work under a G-2 or G-1 Works independently Depends on your gas licence
Typical roles Apprentice·Installer's assistant Service technician·Furnace & boiler tech Hydronic installer·Boiler service tech
Our Programs

Our Programs

Three routes into heating and gas work

Entry Level · TSSA Approved

Gas Technician G-3

No prerequisite · start here

The entry point to every gas career in Ontario. You finish ready to challenge the TSSA G-3 exam.

  • Gas safety, B149 codes and regulations
  • Fuel characteristics, tools and test equipment
  • Piping and tubing systems
  • Basic electricity and appliance fundamentals

Career Outcomes

Gas Technician Apprentice·HVAC Installer Assistant·Service Technician Helper

Apply for G-3
Advanced · TSSA Approved

Gas Technician G-2

Requires a valid G-3

The working technician's licence. Builds on G-3 with residential and light-commercial equipment and controls.

  • Residential and light-commercial gas equipment
  • Controls, venting and air handling
  • Hydronic and forced warm-air heating systems
  • Testing, commissioning and fault diagnosis

Career Outcomes

Gas Technician (G-2)·HVAC Service Technician·Furnace & Boiler Technician

Apply for G-2
Heating Specialisation

Hydronic Heating Certificate

No prerequisite

How water-based heating systems are designed, installed and serviced — boilers, radiant floors and the controls that run them.

  • Boiler and hot-water heating fundamentals
  • Radiant floor, baseboard and radiator systems
  • Circulators, pumps, zone valves and controls
  • System piping, commissioning and maintenance

Career Outcomes

Hydronic Systems Installer·Boiler Service Technician·HVAC Service Technician

Apply for Hydronic Heating
Entry level · TSSA approved

Gas Technician G-3

No prerequisite · start here
The entry point to every gas career in Ontario. You finish ready to challenge the TSSA G-3 exam.
Scope: gas appliances up to 400,000 BTU/h under the supervision of a G-2 or G-1 technician.

Career Outcomes

Gas Technician Apprentice · HVAC Installer
Assistant · Service Technician Helper
Advanced · TSSA approved

Gas Technician G-2

Requires a valid G-3
The working technician’s licence. Builds on G-3 with residential and light-commercial equipment and controls.
Scope: work independently on natural gas and propane appliances up to 400,000 BTU/h.

Career Outcomes

Gas Technician (G-2) · HVAC Service Technician · Furnace & Boiler Technician
Heating specialisation

Hydronic Heating Certificate

No prerequisite
How water-based heating systems are designed, installed and serviced — boilers, radiant floors and the controls that run them.
Best for: technicians who want a heating specialisation that pairs with gas certification.

Career Outcomes

Hydronic Systems Installer · Boiler Service Technician · HVAC Service Technician

Our Programs

Why the trades beat waiting for the right job

Why It Matters

Why It Matters

Why the trades beat waiting for the right job

Strong earning potential

You're paid for a licence that takes months, not years, to earn — and rates climb with every level you add.

High-demand industry

Ontario's furnaces, boilers and hydronic systems need servicing every season. GTA employers are hiring certified techs now.

Recession-proof career

Heating is essential infrastructure, not discretionary spend. The work holds up when other sectors slow down.

Hands-on training

Shop-based learning on real appliances, piping and controls — your first day on site isn't your first time holding the tools.

Industry recognition

A TSSA certificate travels with you between contractors, cities and roles anywhere in Ontario.

Strong earning potential

You're paid for a licence that takes months, not years, to earn - and rates climb with every level you add.

High-demand industry

Ontario's furnaces, boilers and hydronic systems need servicing every season. GTA employers are hiring certified techs now.

Recession-proof career

Heating is essential infrastructure, not discretionary spend. The work holds up when other sectors slow down.

Hands-on training

Shop-based learning on real appliances, piping and controls — your first day on site isn't your first time holding the tools.

TSSA-focused learning

Built around the CSA modules and B149 codes the TSSA exam actually tests, through a TSSA-approved provider.

Industry recognition

A TSSA certificate travels with you between contractors, cities and roles anywhere in Ontario.

Open to more people than you'd expect

Not sure which category you fall into, or whether your documents qualify? We check before you apply — at no cost.

Hands-on training

International Students

Protected Refugees

Eligibility Band

Open to more people than you'd expect

Not sure which category you fall into, or whether your documents qualify? We check before you apply — at no cost.

  • Domestic Students
  • International Students
  • Protected Refugees
Check My Eligibility
A TSSA-Approved Provider

Quality You Can Trust

A TSSA-approved provider, not a shortcut

In Ontario, only training delivered by a TSSA-approved provider prepares you to challenge the Gas Technician certification exams. Touch Abroad works with EPIC College of Technology in Mississauga, where gas programs are TSSA-approved and taught in person on live equipment.

  • In-person, shop-based instruction on real appliances
  • Curriculum mapped to the CSA modules and B149 codes
  • Certification recognised by employers across Ontario
Talk to an advisor
3

TSSA-aligned certificates delivered through one partner college

400,000

BTU/h — the equipment ceiling your G-2 licence covers

1 day

Typical response time on a free eligibility check

End to end

Program choice, documents, application and enrollment

Quality You Can Trust

A TSSA-approved provider, not a shortcut

In Ontario, only training delivered by a TSSA-approved provider prepares you to challenge the Gas Technician certification exams. Touch Abroad works with EPIC College of Technology in Mississauga, where gas programs are TSSA-approved and taught in person on live equipment.

3

TSSA-aligned certificates delivered through one partner college

400,000

BTU/h – the equipment ceiling your G-2 licence covers

1 day

Typical response time on a free eligibility check

End to end

Program choice, documents, application and enrollment

How It Works

Four steps from enquiry to enrolled

No guesswork, and no paperwork you handle alone. Here’s exactly what happens after you submit the form.

01

Free eligibility check

An advisor calls within one business day to confirm which certificate you qualify for.

02

Program & funding plan

We walk through costs, intake dates, and the funding or instalment options open to you.

03

We build the application

Documents, forms and submission to EPIC College - prepared and sent on your behalf.

04

Enrolled and started

You get your offer and start date. We stay reachable through your first weeks of class.

Student Reviews

Trusted by thousands of
students

Rated 5 out of 5
“Thank you, Touch Abroad team, for great customer service. It was so easy to pursue the course because of their friendly staff. They helped me throughout the process. I fully recommend this company.”

Harshneet Khanna

Touch Abroad student
Rated 5 out of 5
“A fantastic experience with Touch Abroad. The customer service was exceptional. Their team went above and beyond to help me get enrolled. Highly recommend.”

Harsh Soni

Touch Abroad student
Rated 5 out of 5
“Touch Abroad made my admission process smooth and hassle-free. Their team was professional, responsive, and guided me through every step. Highly recommend their services!”

Rao Jain

Touch Abroad student

Common Questions

Before you apply

Do I need a G-3 before I can take G-2?
Yes. Gas Technician 3 is the entry-level certification in Ontario, and you need a valid G-3 before you can enrol in a G-2 program or challenge the G-2 exam. If you’re new to the trade, start with G-3.
A G-3 can work on gas appliances up to 400,000 BTU/h, but only under the supervision of a G-2 or G-1 technician. A G-2 can work independently on natural gas and propane equipment up to 400,000 BTU/h — that covers most residential furnaces, water heaters and boilers, which is why G-2 is the standard working technician’s licence.
As of January 1, 2026, the TSSA requires G-3 holders who earned certification through the challenge process to document 450 hours of G-3 work experience before enrolling in a G-2 program. Bring your details to the consultation and we’ll confirm your eligibility before you apply.
Domestic students, international students and protected refugees are all eligible. Requirements differ by category, so we verify your documents up front rather than after you’ve applied.

Yes. Permanent colour gives full grey coverage, and we match it to a shade that suits your skin tone rather than a flat opaque block. Most clients return every four to six weeks as regrowth appears.

Student Reviews

One call tells you exactly where you stand

Which certificate you’re eligible for, what it costs, when the next intake starts, and what to bring. Free, and there’s no obligation to enrol.

Contact Information

Hours of Operation

Copyright © 2025 Touch Abroad – Designed by RCSPL CANADA INC.

Chat with Us!